Expansion Test - Toshiba Tecra M1 Maintenance Manual

3.14 Expansion Test

3
3.14 Expansion Test
To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and
follow the directions on the screen. The expansion test contains two subtests.
NOTE: To execute this subtest, the PC card wraparound connector is required.
Subtest 01 PCMCIA Wraparound
This test checks the following signal line of the PC card slot:
q Address line
q REG#, CE#1, CE#2 line
q Data line
q Speaker line
q Wait line
q BSY#, BVD1 line
This subtest is executed in the following order:
Sub# Address
01
02
03
04
05
NOTE: When the subtest 01 is executed, the following message will appear: Test slot
number select (1:slot0, 2:slot1, 0:slot0&1)?
Select the slot to test.
Subtest 03 RGB monitor ID
TECRA M1 Maintenance Manual (960-436)
Good
00001 nn
00001 nn
00002 ww
00003 ––
00004 40,80
00005 nn
Bad Contents
xx Address line
xx REG#, CE#1, CE#2
nn=A0, 90, 80, 00
rr Data line
ww=write data, rr=read data
–– Speaker line
xx Wait line (40<xx<80)
xx Other lines (BSY#, BVD1)
NN=21, 00
3 Tests and Diagnostics
3-35