Toshiba Tecra M1 Maintenance Manual page 184

3.21 Bluetooth Test
Table 3-2 Error code for Bluetooth test (BD_ADDR) (2/2)
Error code Meaning
0x20
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2a
0x2b
0x2c
0x2d
0x2e
0x2f
** See the Specification of the Bluetooth System in detail.
Subtest 02 Communication test (DUT mode)
This subtest checks the Bluetooth communication functions. Preparing the tester machine for the
Bluetooth test program. Insert a floppy disk containing the test program into the tester machine and
turn on the tester machine. The Bluetooth test menu will appear:
Press 3 to select the test and press Enter in the target machine. The following message will appear:
When the test begins, the machine displays BD_ADDR of the DUT. The progress bar stops when
the test is completed. The following message is displayed.
----------------------------------------------------------------------------
-
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX
----------------------------------------------------------------------------
-
+------------ ----------+
| DUT
+----------------------+
Ready>>>>>>>>>>>>>>>>>>>>>>
TECRA M1 Maintenance Manual (960-436)
Unsupported LMP Parameter Value.
Role Change Not Allowed.
LMP Response Timeout.
LMP Error Transaction Collosion.
LMP PDU Not Allowed.
Not Exist
Not Exis t
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
Not Exist
| BD_ADDR of the DUT = XXXXXXXXXXXXX [h]
[ESC] : Stop
Copyright (C) by TOSHIBA Co.
< - Progress Bar
3 Tests and Diagnostics
3-57