Toshiba Tecra M1 Maintenance Manual page 301

4.21 Display Mask
3. Release the latches on the display mask and remove the display mask.
Display mask
Installing the Display Mask
To install the display mask, follow the steps below and refer to figures 4-36 and 4-37.
1. Install the display mask on the LCD module.
2. Fasten the latches of the display mask.
3. Secure the display mask with the following screws.
M2.5 6
TECRA M1 Maintenance Manual (960-436)
Figure 4-37 Removing the Display mask (2)
FLAT HEAD screw
4 Replacement Procedures
2
4-67