Toshiba Tecra M1 Maintenance Manual page 306

4 Replacement Procedures
5. Disconnect the LCD cable and remove the LCD module.
CAUTION: When removing the LCD cable, be careful not to damage the
connector.
Copper tape
(For SXGA+ models only)
Connector
Glass tape
Mask seal
M2 3 SUPER FLAT screw
4-72
Figure 4-39 Removing the LCD module (1)
4.23 LCD Module
M2 3 SUPER FLAT screw
Mask seal
TECRA M1 Maintenance Manual (960-436)