Toshiba Tecra M1 Maintenance Manual page 212

3 Tests and Diagnostics
Use this option to enable or disable the CPU sleep function.
Enabled
Disabled
Display Auto Off
Use this option to disable or set the duration of the display automatic power off
function. This function causes the computer to turn the LCD panel's illumination off
if you make no entry for the set period of time.
Disabled
xx Min.
HDD Auto Off
Use this option to set the duration of the HDD automatic power off function.
xx Min.
LCD Brightness
Use this option to set the level of LCD brightness.
Super-Bright
Bright
Semi-Bright
Cooling Method
If the CPU becomes too hot, the fan turns on or the processing speed is lowered
automatically. When the CPU temperature falls to a normal range, the fan turns off.
Maximum performance
3-84
Enables sleep mode. (Default)
Disables sleep mode.
Disables display automatic power off.
Automatically turns off power to the LCD panel's
illumination if the panel is not used for the duration set.
The duration xx can be set to 1, 3, 5, 10, 15, 20 or 30
minutes.
Automatically turns off power to the hard disk drive
if it is not used for the duration set. The duration xx
can be set to 1, 3, 5, 10, 15, 20 or 30 minutes.
Full brightness for maximum visibility.
Full brightness for high visibility.
Less than full brightness for saving power.
Turns on fan first, then if necessary lowers CPU
processing speed.
TECRA M1 Maintenance Manual (960-436)
3.29 SETUP