Toshiba Tecra M1 Maintenance Manual page 166

3.16 Wireless LAN Test (Agere)
Subtest 01 Transmit & Receive test
This sub test checks transmit and receive functions.
Transmit test
Press 1 to select the test and press Enter in the target machine as a responder. The following message
will appear:
###############################################################
####
###############################################################
*
*
*
*
*
*
*
***************************************************************
....Press test number [1-2,0]
======== RESPONDER SET ========
ORiWL.EXE Rev.03 Copyright (c) Toshiba Corporation,2000, 2001
Initializing...
[[[ Responder Mode ]]]
MAC adress : XXXXXXXXXXXX
Ad-hoc mode
SS ID : PHN Test
Channel : 10
Tx ratio : 2 Mbps
To prepare the tester machine for the Wireless LAN test program, insert a floppy disk
containing the test program into the tester machine and turn on the tester machine. The Wireless LAN
test menu will appear.
Press 0 to select the test and press Enter in the initiator machine. The following message will appear:
##############################################################
####
##############################################################
*
*
*
*
*
*
*************************************************************
....Press test number [1-2,0]
======== RESPONDER SET ========
ORiWL.EXE Rev.03 Copyright (c) Toshiba Corporation,2000, 2001
Initializing...
[[[ Responder Mode ]]]
MAC address : XXXXXXXXXXXX
Ad-hoc mode
SS ID : PHN Test
Channel : 10
Tx ratio : 2 Mbp
PASS : 134 ERROR : 0
TECRA M1 Maintenance Manual (960-436)
Wireless LAN sub system repair test
1 Transmit & Receive test [Responder]
2 MAC Address test [Mini-PCI Wireless LAN]
3 Wireless LAN (WEP64/128) test
0 Transmit & Receive test [Initiator]
Wireless LAN sub system repair test
1 Transmit & Receive test [Responder]
2 MAC Address test [Mini-PCI Wireless LAN]
0 Transmit & Receive test [Initiator]
VX.XX
?1
VX.XX
?1
3 Tests and Diagnostics
####
*
*
*
*
*
*
*
####
*
*
*
*
*
*
3-39