Usb Board - Toshiba Satellite Pro U300 Maintenance Manual

Replacement Procedures

4.16 USB Board

The following describes for removing the cover assembly (See Figure 4-25).
Removing USB board
1. Remove the USB cable from CN4 and USBCN1
2. Loose below screw from USB board
M2.5x4.0
Installing the USB Board
1. Put USB board in correct location and fix below screw
M2.5x4.0
2. Connect the USB cable between CN4 and USBCN1
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08) 44
FLAT BIND screw
Figure 4-25 Removing the USB board
FLAT BIND screw
x1
x1