Toshiba Tecra M1 Maintenance Manual page 223

3.29 SETUP
Disabled
(b) USB-FDD Legacy Emulation.
Use this option to enable or disable USB-FDD Legacy Emulation.
Enabled
Disabled
15. PCI LAN (Not used)
This option enables/disables the Built-in LAN functions.
(a) Built-in LAN
Enabled
Disabled
16. HDD Password
This option sets HDD password. HDD password is a security function to protect the built-
in HDD.
(a) HDD
This item selects the hard disk to set HDD password.
Built-in HDD
Second HDD
(b) HDD Password Mode
This item registers HDD password and can be selected only for registering HDD
password. To change HDD Password Mode when HDD password is registered,
delete the registered HDD password first, and then register new password.
User Only
Master+User
(c) User Password
This item sets User password.
For details on setting user password, refer to the User's Manual.
TECRA M1 Maintenance Manual (960-436)
USB Legacy Support cannot be used.
USB Legacy Support can be used. (Default)
USB Legacy Support cannot be used.
Enables Built-in LAN functions. (Default)
Disables Built-in LAN functions.
Sets HDD password for the built-in HDD (Default)
Sets HDD password for the second HDD
Sets only User HDD Password (Default)
Sets Master HDD Password and User HDD Password
3 Tests and Diagnostics
3-95