4.7 Modem Daughter Card
4.7
Modem Daughter Card
Removing the Modem Daughter Card
To remove the modem daughter card, follow the steps below and refer to figure 4-9 and 4-10.
1. Remove the following screw securing the modem daughter card cover. Insert your finger
into the slot and remove the cover by lifting it up from the side of screw hole.
M2.5 4 FLAT HEAD screw
Modem daughter card cover
Figure 4-9 Removing the Modem daughter card cover
TECRA M1 Maintenance Manual (960-436)
4 Replacement Procedures
1
M2.5 4 FLAT HEAD screw
Slot
4-25