Toshiba Tecra M1 Maintenance Manual page 263

4.8 CPU
5. Install the fin.
6. Insert the "1" side of the CPU holder into the empty space, with rotated 90 degrees
counterclockwise first. Then rotate it 90 degrees clockwise and fit the two holes of the CPU
holder to the bosses on the fin.
7. Secure the CPU holder with the following screws.
M2 6
8. Place the CPU cover and secure it with the following screws.
M2.5 4
M2.5 16 FLAT HEAD screw
TECRA M1 Maintenance Manual (960-436)
BIND screw
FLAT HEAD screw
4
3
1
4 Replacement Procedures
4-33