4 Replacement Procedures
4.9
Modem Daughter Card (MDC)
Removing the Modem Daughter Card
To remove the modem daughter card, follow the steps below and refer to figure 4-16.
1. Remove the following screws securing the modem daughter card.
• M2×4Z
2. Lift up the modem daughter card to disconnect it from the connector PJ3000 on the
system board.
3. Disconnect the modem cable from the connector on the modem daughter card.
Modem daughter card
Modem cable
4-28
BIND screw
Figure 4-16 Removing the Modem Daughter Card (MDC)
4.9 Modem Daughter Card (MDC)
×2
M2×4Z BIND
PJ3000
TECRA M2V Maintenance Manual (960-476)