Choosing A Line For Autodial; Using Intercom As The Line For Autodial - Northern Telecom Compact ICS 4.0 Manual

78 / Time savers for making calls

Choosing a line for Autodial

To include a line selection for an external number, press the
line or intercom button before you enter the number. To select
∆
a line pool, press a programmed line pool button, or press
If you select a line before pressing the autodial button, the call
goes out on the line you have selected instead of the line that
is part of the autodialer programming.
For the M7100 telephone, an external autodialer can be
programmed only by using a line and not a line pool.
Tip -
number, the call uses your prime line (if you have one).

Using intercom as the line for Autodial

If you press
number, you must include a valid line pool access code or a
destination code. If line pool access codes or destination codes
are changed, remember to reprogram autodial numbers.
Displays
987__
QUIT
Autodial full
Button erased
Compact ICS 4.0 System Coordinator Guide
and enter a line pool access code.
If you do not include a line selection in an autodial
∆
as the line for an external autodial
Continue to enter digits until the number is
BKSP OK
complete. Press
erase an incorrect digit. Press
OK
The memory allotted to autodial numbers in
your Norstar system is full.
While programming external Autodial, you
erased the button by pressing
OK
√
when you are finished.
before entering any digits.
˙
BKSP
or to
or
˙
or
P0881596 Issue 02