Programming The Overflow Set - Northern Telecom Compact ICS 4.0 Manual

≠
156 / Programming Hunt Groups
6. Press
≠
7. Enter the Hunt Group number you want to program (1-6).
'
8. Press
9. Press
CHANGE
10. Press
120, 180
®
11. Press

Programming the overflow set

This setting allows you to program the overflow set to which
the Hunt Group calls are to be routed. Unless the overflow
position is a Hunt Group set, the call ceases to be a Hunt Group
call. If the overflow set is a Hunt Group set, the call is treated
as a new call and goes to the bottom of the queue.
The overflow set can be a set DN number associated with a
voice mailbox.
1. Place the programming overlay on any M7310 or M7324
ƒ••¤flfl‹››
telephone.
2. Press
¤‹fl›fl
The display shows
3. Press
Terminals&Sets
'
4. Press
prgrming
≠
≠
5. Press
6. Press
≠
7. Enter the Hunt Group number you want to program (1-6).
8. Press
Compact ICS 4.0 System Coordinator Guide
. The display shows
. The display shows
until the display shows
to set the queue time-out:
'
.
to exit or
Password:
(ADMIN). The display shows
.
until the display shows
.
. The display shows
. The display shows
. The display shows
Show group
Member DNs:
Q Timeout:
15, 30, 45, 60,
to continue programming.
(CONFIG).
.
System
Hunt groups
Show group
Member DNs:
.
.
.
.
.
.
P0881596 Issue 02