Monitoring telephones with the CAP module
The indicators
module show the status of Norstar telephones.
The indicator is on when the telephone has:
•
an active call
•
Do Not Disturb turned on
The indicator is off when a telephone has:
•
no active call
•
a call on hold and no other active call
Tip -
®
Release button
®
Pressing
down.
While you are on a call, do not press
are using. If you do, you disconnect the call. Use
instead.
Hearing aid compatibility
The receivers on all Norstar telephones are compatible with
hearing aids as defined in the FCC rules, Part 68, section
68.316. Not all hearing aids are optimized for use with a
telephone.
P0881596 Issue 02
ˆ
beside internal autodial buttons on your CAP
You can send up to 30 messages from a CAP.
ends a call. You do not have to put the receiver
also ends feature programming.
Answering calls / 31
®
ƒ
to end a feature you
Compact ICS 4.0 System Coordinator Guide