Adding Or Removing Members From A Group - Northern Telecom Compact ICS 4.0 Manual

Adding or removing members from a group

Members of the group can be any Norstar set, CTA 500dm, or
ISDN terminal. A Norstar set can be in more than one Hunt
Group but is considered a member in each Hunt Group,
increasing the total number of members in the system.
There can be only one appearance of the same Hunt Group on
a set. Hunt Group DNs cannot be members of other Hunt
Groups. A DN can be associated with a member of a Hunt
Group and is called a member DN.
Consult your customer service representative to determine
your Hunt Group number range.
Note: Only a three digit DN length works with Hunt Groups.
1. Place the programming overlay on any M7310 or M7324
ƒ••¤flfl‹››
telephone.
2. Press
¤‹fl›fl
The display shows
3. Press
Terminals&Sets
'
4. Press
prgrming
≠
≠
5. Press
6. Press
≠
7. Enter the Hunt Group number you want to program (1-6).
≠
8. Press
9. Press
group.
P0881596 Issue 02
Password:
(ADMIN). The display shows
.
until the display shows
.
. The display shows
. The display shows
. The display shows
. The display shows the members for that
Programming Hunt Groups / 149
(CONFIG).
.
System
Hunt groups
Show group
Member DNs:
Compact ICS 4.0 System Coordinator Guide
.
.
.