Applying Button Cap Labels; Identifying The Telephones - Northern Telecom Compact ICS 4.0 Manual

Applying button cap labels

ƒ•‚
Before you apply button labels, activate the Button Inquiry feature
(
activating features as you put the labels onto the buttons.
Keep the extra labels and button caps with each Norstar telephone
or leave them with the system coordinator.
Types of button caps
• Unlabeled, clear button caps
with appropriate green or gray paper for typing in line numbers,
telephone numbers, and features
• Pre-printed, colored button caps
in green or gray
Some examples of pre-printed button caps
∫
Green caps
©
Line 1
Tip -
use preprinted green button caps for lines that
support incoming and outgoing calls. Use clear
button caps for target lines that are incoming only.

Identifying the telephones

1. Write the individual telephone numbers on the labels and attach
them to the appropriate Norstar telephones.
2. Write the telephone number and the internal number on the
appropriate receiver card for each type and color of telephone
that is to be installed.
3. Cover the receiver card underneath the receiver of each
telephone with the plastic lens.
P0881596 Issue 02
) to verify the button functions and to avoid
µ
Grey caps
ß
To make identification of line types easier,
Customizing your telephone / 131
Compact ICS 4.0 System Coordinator Guide