Norstar Default Button Assignments - Northern Telecom Compact ICS 4.0 Manual

132 / Customizing your telephone

Norstar default button assignments

Default features are assigned automatically to the programmable
buttons on Norstar telephones and vary depending on the
telephone. The default features are listed in the tables in this
chapter.
Rules of default button assignment
Line and intercom buttons are assigned by default templates and
can be changed in programming. Handsfree/Mute and Answer
buttons are not assigned by default. If these features are defined,
however, they are automatically assigned to specific buttons, as
described on this and the following page. None of these buttons can
be assigned to M7100 telephones.
The Handsfree/Mute feature appears on the bottom right-hand
button (the bottom button on the M7208 telephone), moving the
Intercom button(s) up one position.
Each telephone can have up to eight Intercom buttons. They appear
above the Handsfree/Mute button at the bottom right-hand position
on your telephone (the bottom button on the M7208 telephone).
Each telephone can have up to four Answer buttons. They appear
above Intercom buttons in the right column and continue up from the
bottom in the left column, replacing the features on those buttons.
(On the M7208 telephone, Answer buttons appear above Intercom
buttons and below external line buttons in a single column.)
External line buttons appear in ascending line order, starting at the
top button in the left column (the top button on the M7208
telephone). If more than five external lines are assigned to an
M7310 telephone assignment continues down the buttons on the
right column, erasing the features on those buttons. Line buttons
have priority over feature access buttons but not Handsfree/Mute,
Intercom, or Answer buttons.
M7100 telephone button defaults
For for the default template, the one programmable button on the
M7100 telephone is
Compact ICS 4.0 System Coordinator Guide
µ
.
P0881596 Issue 02