Setting The Hunt Delay - Northern Telecom Compact ICS 4.0 Manual

In the latter case, the call is routed to the overflow position.
Once a call goes to the overflow position it is no longer a Hunt
Group call.
1. Place the programming overlay on any M7310 or M7324
ƒ••¤flfl‹››
telephone.
2. Press
¤‹fl›fl
The display shows
3. Press
Terminals&Sets
'
4. Press
prgrming
≠
≠
5. Press
6. Press
≠
7. Enter the Hunt Group number you want to program (1-6).
'
8. Press
9. Press
CHANGE
10. Press
Broadcast
®
11. Press

Setting the hunt delay

This setting allows you to program the number of rings the
system permits at a Hunt Group set before moving on to the
next set in the Hunt Group.
1. Place the programming overlay on any M7310 or M7324
ƒ••¤flfl‹››
telephone.
2. Press
The display shows
P0881596 Issue 02
Password:
(ADMIN). The display shows
.
until the display shows
.
. The display shows
. The display shows
. The display shows
until the display shows
to set the mode:
'
.
to exit or
Password:
Programming Hunt Groups / 153
(CONFIG).
.
System
Hunt groups
Show group
Member DNs:
Mode
Sequential Rotary
,
to continue programming.
(CONFIG).
.
Compact ICS 4.0 System Coordinator Guide
.
.
.
.
,