Changing Button Programming - Northern Telecom Compact ICS 4.0 Manual

≠
140 / User Preferences
2. Press
change. The display reads the model number of the
telephone at the extension.
The display shows
connected at that internal number.
'
You cannot make changes if the model is
3. Press
User Preferences.
User Preferences programming is available under the heading
User Preferences
programming.
Sub-headings in User Preferences
User prefernces
Model
Button prgrming
User speed dial
Call log opt'ns
Dialing opt'ns
Language
Display cntrst
Ring type
≠

Changing button programming

Press
number of buttons on the telephone (an example is shown in
Displays at the end of this section).
If the telephone has a CAP module, you can press
'
the buttons on the module.
Press
telephone.
Compact ICS 4.0 System Coordinator Guide
when you see the telephone you want to
Connect set
to move through all the subheadings in
Terminals&Sets
in
Button prgrming
at
to move through all the buttons on the
if no telephone is
Other
.
in the main body of
. The display shows the
CAP1
P0881596 Issue 02
to see