Adding Or Removing Telephones From A Group Used With Ccr - Northern Telecom Compact ICS 4.0 Manual

≠
6. Press
CHANGE
7. Press
rings (between 1 and 12).
If the system is busy answering calls, the line rings until CCR
can retrieve the call.
If CCR is programmed to answer the call in less than two
rings, the call information may not be captured and forwarded
to telephones in the CCR group.

Adding or removing telephones from a group used with CCR

The greeting you create for CCR tells a caller to press a
number to reach a group of telephones. You add or remove
telephones from these groups (CCR groups) in programming.
You need the programming template found at the front of this
guide. See ''Getting started with Norstar'' on page 1 for more
ƒ••¤flfl‹››
information.
¤‹fl›fl
1. Press
2. Press
"
password).
≠
3. Press
'
4. Press
≠
5. Press
'
6. Press
≠
7. Press
8. Press
≠
which you want to make changes.
9. Press
telephone you want to add or remove from the group.
P0881596 Issue 02
.
until you see the appropriate number of
(the default System Coordinator
'
twice.
, , and
three times. The display shows
.
. The display shows
and enter the number of the group to
and enter the internal number of the
Auto Attendant / 69
.
≠
.
CCR groupsˆ
Compact ICS 4.0 System Coordinator Guide
CCRˆ
.
.