Moving Members Of A Group - Northern Telecom Compact ICS 4.0 Manual

150 / Programming Hunt Groups
ADD
10. Press
®
member from the group.
11. Press

Moving members of a group

Member order within a Hunt Group is important. The member
order determines how a call is routed through a Hunt Group.
1. Place the programming overlay on any M7310 or M7324
ƒ••¤flfl‹››
telephone.
2. Press
¤‹fl›fl
The display shows
3. Press
Terminals&Sets
'
4. Press
prgrming
≠
≠
5. Press
6. Press
≠
7. Enter the Hunt Group number you want to program (1-6).
≠
8. Press
9. Press
group.
MOVE
10. Press
within the Hunt Group. The display shows the member
number followed by an arrow.
®
11. Enter the new position number for the extension.
12. Press
Compact ICS 4.0 System Coordinator Guide
to add a member or press
'
to exit or
Password:
(ADMIN). The display shows
.
until the display shows
.
. The display shows
. The display shows
. The display shows
. The display shows the members for that
to move an existing member to another place
'
to exit or
REMOVE
to remove a
to continue programming.
(CONFIG).
.
System
Hunt groups
Show group
Member DNs:
to continue programming.
.
.
.
P0881596 Issue 02