Turning On Line Redirection - Northern Telecom Compact ICS 4.0 Manual

102 / Forwarding your calls
You cannot use the Line Redirection feature code at either an
M7100 telephone or a telephone connected to an ATA.

Turning on Line Redirection

ƒ°›
1. Press
2. Select the outgoing line to be used for redirected calls.
3. Enter the number to which calls are to be redirected (the
ways you can do this are listed below).
4. Select the lines to be redirected.
Enter the telephone number to which you want to redirect calls
by using one of the following methods.
• Press an external autodial button.
• Enter an external telephone number (using no more than
˙
24 digits) then press
• Press
outgoing line is a private network line that does not require
you to dial digits.
If you use
˙
wait until all the lines on your telephone light up before
pressing
before all the lines light up, those lines not lit are not
redirected.
Compact ICS 4.0 System Coordinator Guide
˙
OK
or
ALL
to redirect all your lines, it is important that you
OK.
or
.
OK
or .
if the line you have chosen as the
˙
If you press
ƒ°›
OK
or
P0881596 Issue 02