Programming The Queue Time-Out - Northern Telecom Compact ICS 4.0 Manual

ƒ••¤flfl‹››
2. Press
¤‹fl›fl
The display shows
3. Press
Terminals&Sets
'
4. Press
prgrming
≠
≠
5. Press
6. Press
≠
7. Enter the Hunt Group number you want to program (1-6).
'
8. Press
9. Press
CHANGE
10. Press
Queue
®
11. Press

Programming the queue time-out

This setting allows you to program the number of seconds a
call remains in the Hunt Group queue before it is routed to the
overflow position.
1. Place the programming overlay on any M7310 or M7324
ƒ••¤flfl‹››
telephone.
2. Press
¤‹fl›fl
The display shows
3. Press
Terminals&Sets
'
4. Press
prgrming
≠
5. Press
P0881596 Issue 02
Password:
.
until the display shows
.
. The display shows
. The display shows
. The display shows
until the display shows
to set the mode:
'
.
to exit or
Password:
.
until the display shows
.
. The display shows
Programming Hunt Groups / 155
.
(ADMIN). The display shows
Hunt groups
Show group
Member DNs:
BusyTone
to continue programming.
.
(ADMIN). The display shows
Hunt groups
Compact ICS 4.0 System Coordinator Guide
(CONFIG).
System
.
.
.
If busy:
.
Overflow
, ,
(CONFIG).
System
.