Assigning Or Unassigning Lines To A Group - Northern Telecom Compact ICS 4.0 Manual

Assigning or unassigning lines to a group

Configure the prime set for a Hunt Group's line to None to
avoid delayed ring transfer of external Hunt Group calls to the
prime set before the Hunt Group can receive the call.
A line can be assigned to only one group.
1. Place the programming overlay on any M7310 or M7324
ƒ••¤flfl‹››
telephone.
2. Press
¤‹fl›fl
The display shows
3. Press
Terminals&Sets
'
4. Press
prgrming
≠
≠
5. Press
6. Press
≠
7. Enter the Hunt Group number you want to program (1-6).
'
8. Press
≠
9. Press
10. Press
11. Enter the line number you want to program and press
to go to the first line assigned to this group, or press
to go to the first line in the system.
CHANGE
12. Press
Assigned
*HGnn*
®
13. Press
P0881596 Issue 02
Password:
(ADMIN). The display shows
.
until the display shows
.
. The display shows
. The display shows
. The display shows
. The display shows
. The display shows
to program the line as
.
'
means the line is assigned to another Hunt Group.
to exit or
Programming Hunt Groups / 151
(CONFIG).
.
System
Hunt groups
Show group
Member DNs:
Line assignment
Show line:
Unassigned
to continue programming.
Compact ICS 4.0 System Coordinator Guide
.
.
.
.
.
SCAN
LIST
or