Long Tones; Programmed Release - Northern Telecom Compact ICS 4.0 Manual

198 / Using System features
For pulse dialing,
dialing sequence.

Long Tones

The Long Tones feature allows you to control the length of a
tone so that you can signal devices such as fax or answering
machines which require tones longer than the standard 120
milliseconds.
1. While on a call, press
2. Press the dial pad buttons to produce the appropriate tones.
Each tone sounds for as long as you hold down the button.
Long tones can be used on any call except a conference call.
You can use internal lines of the Norstar system to activate a
device connected to an analog terminal adapter (ATA) in
another area of your office, or external lines to access devices
outside the Norstar system.
Displays
Long Tones:

Programmed Release

®
The Programmed Release feature performs same function as
in a programmed dialing sequence. When the system
encounters Programmed Release in a dialing sequence, it stops
dialing and hangs up the call.
The Programmed Release symbol (
spaces in a programmed dialing sequence.
Compact ICS 4.0 System Coordinator Guide
•
inserts a 1.5 second pause into the
ƒ°‚°
At the appropriate time, press any dial pad
button. Hold each button down for as long as
necessary. Press
cancel Long Tones.
ƒ°‚°
.
ƒ ˙
or
ƒ•°·
fi
) takes up two of the 24
to
P0881596 Issue 02