Imaging Unit (Iu); Removal Of The Imaging Unit (Iu); Disassembly Of The Iu - Konica Minolta Di1611 Service Manual

Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
4.3.4

Imaging Unit (IU)

NOTE
• When the developer is to be changed, it is necessary that toner in the Recycled Toner
Recycling Duct and Toner Conveying Duct be fed into the Developer Mixing Chamber. To
do that, remove the Toner Bottle and run "ATDC Auto Adjust" twice.
☞ 2-46
(1)

Removal of the Imaging Unit (IU)

1. Open the Front Door.
2. Open the Right Door.
(2)

Disassembly of the IU

3. Remove two screws and the IU.
Precautions for Installation of the IU
• When installing the IU, use care not to damage the
PC Drum.
• Before attempting to install the IU, be sure to fully
open the Right Door. Take care that, if the IU is
installed with the Right Door locked halfway, it may
interfere with the transfer roller.
• When inserting the IU, do that slowly and, when
4035D021AA
you are sure that the drum gear contacts the mat-
ing part, push the IU all the way into position. If this
step is done all at once, the drum gear could be
damaged.
1. Remove one screw in the rear of the IU and
remove the harness cover.
4035D022AA
1-15
MAINTENANCE