Loop Adjust (Tray1); Loop Adjust (Tray2 To Tray5) - Konica Minolta Di1611 Service Manual

ADJUSTING/SETTING

(13) LOOP ADJUST (TRAY1)

Purpose
To adjust the length of the loop formed in the
paper before the Synchronizing Roller.
✽ When a skew feed, fold, or misfeed of paper
occurs
✽ When variations in the amount of void on
the leading edge occurs
<Adjustment Procedure>
1. Call Service's Choice of Service Mode to the screen.
2. Select "Loop Adjust (Tray1)" and press the [Yes] key.
3. Using [ ▲ / ▼ ] key, select the desired setting value.
4. Press the [Yes] key to validate the setting value selected in step 3.
Adjustment Instructions
• Try a different setting value until there are no variations in the amount of void on the lead-
ing edge, and paper skew, fold, or misfeed.

(14) LOOP ADJUST (TRAY2 TO TRAY5)

Purpose
To adjust the length of the loop formed in the
paper before the Synchronizing Roller when
the optional Paper Feed Unit is used.
✽ When a skew feed, fold, or misfeed of paper
occurs
✽ When variations in the amount of void on
the leading edge occurs
Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
Setting Details/Precautions
Setting range: -3.9 to 3.9 mm
(1 step: 0.6 mm)
Setting Details/Precautions
✽ Refer to the option service manual (PF-
126) for details.
2-29