Konica Minolta Di1611 Service Manual page 83

Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
8. Click the [Update] button to start the transfer of the firmware data. (Wait until data trans-
fer is completed.)
9. Check the Display for status of the firmware upgrading sequence.
NOTE
• NEVER turn OFF and ON the Power Switch as long as the above screens are being dis-
played.
10. When the following message appears in the Display, it indicates that upgrading of the
firmware has been completed.
11. Click the [OK] button to quit "A3S/A4S Update F/W-VXXX."
12. Turn OFF and ON the Power Switch of the copier.
<PWB-C/C>
4035D530CA
1-63
MAINTENANCE
4980D051AB
4035D532AA