Cleaning Of The Ds Collars; Cleaning Of The Developer Scattering Prevention Plate; (10) Replacement Of The Developer - Konica Minolta Di1611 Service Manual

Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
(8)

Cleaning of the Ds Collars

(9)

Cleaning of the Developer Scattering Prevention Plate

(10) Replacement of the Developer

1. Using a soft cloth dampened with alcohol, wipe
the two Ds Collars clean of dirt.
4035D034AA
1. Remove three screws and the Developer Scatter-
ing Prevention Plate.
Precautions for Installation of the Developer
Scattering Prevention Plate
• When securing the Developer Scattering Preven-
tion Plate, tighten screws in the order of one on
one edge, one at the center, and one on the other
edge.
4035D035AA
2. Using a brush, whisk dust and dirt off the surface
of the Developer Scattering Prevention Plate.
4035D036AA
1. Dump the developer.
4035D037AA
1-19
MAINTENANCE