Remounting Of The Eeprom (U16) - Konica Minolta Di1611 Service Manual

Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
5.2

Remounting of the EEPROM (U16)

NOTE
• When the Control Board (PWB-C/C) is replaced with a new one, EEPROM (U16) must
be demounted from the old PWB-C/C and remounted on the new PWB-C/C.
Mount the EEPROM (U16) of the old PWB-C/C on the new PWB-C/C.
NOTE
• Note the alignment notch marked with A on the
EEPROM (U16) when mounting the IC.
1171D049AA
1-57
MAINTENANCE
4035D514AA