Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
4.4.4
Image Reading Section: Foggy background or rough image
Step
1
Original Glass is dirty.
2
Scanner mirrors are dirty.
3
Exposure Lamp (LA2) is dirty.
4
CCD Unit lens and CCD surface are dirty.
<Check Procedure>
Remove lens cover to check for possible contami-
nation.
5
Exposure Lamp is abnormally lit (flickers or abnor-
mally dark) when the Start key is pressed.
6
Inverter Board (copier: PU2) connector is loose.
7
CCD Board (copier: PWB-J) connector is loose.
<Typical Faulty Images>
Check
3-45
TROUBLESHOOTING
4011T004AA
Result
Action
YES • Clean.
YES • Clean.
YES • Clean.
YES • Clean.
NO
• Go to step 7.
YES • Reconnect.
NO
• Change Exposure
Lamp (LA2).
YES • Reconnect.
NO
• Change Inverter
Board (PU2).
• Change Control
Board (copier: PWB-
C).