Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
(15) LOOP ADJUST (DUPLEX): Di2011 Only
Purpose
To adjust the length of the loop formed in the
paper before the Synchronizing Roller.
✽ When a skew feed, fold, or misfeed of paper
occurs
✽ When variations in the amount of void on
the leading edge occurs
(16) LOOP ADJUST (BYPASS)
Purpose
To adjust the length of the loop formed in the
paper before the Synchronizing Roller when
the Manual Bypass is used.
✽ When a skew feed, fold, or misfeed of paper
occurs
✽ When variations in the amount of void on
the leading edge occurs
<Adjustment Procedure>
1. Call Service's Choice of Service Mode to the screen.
2. Select "Loop Adjust (Bypass)" and press the [Yes] key.
3. Using [ ▲ / ▼ ] key, select the desired setting value.
4. Press the [Yes] key to validate the setting value selected in step 3.
Adjustment Instructions
• Try a different setting value until there are no variations in the amount of void on the lead-
ing edge, and paper skew, fold, or misfeed.
Setting Details/Precautions
✽ Refer to the option service manual (AD-
17) for details.
Setting Details/Precautions
Setting range: -3.9 to 3.9 mm
(1 step: 0.6 mm)
2-30
ADJUSTING/SETTING