Removal Of The Fusing Unit Interlock Switch - Konica Minolta Di1611 Service Manual

MAINTENANCE
(5)

Removal of the Fusing Unit Interlock Switch

1. Remove the Rear Cover.
☞ 1-26
2. Remove the harness from one wiring saddle.
4035D130AC
3. Remove two screws (to which red paint has been
applied).
4035D131AA
4. Unplug four connectors and remove the Fusing
Unit Interlock Switch Assy.
NOTE
• When installing the Fusing Unit Interlock Switch
Assy, make sure that the connectors are con-
nected properly.
4035D132AA
5. Unhook two tabs and remove the Fusing Unit
Interlock Switch.
4035D138AA
1-54
Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004