ADJUSTING/SETTING
3.3.2
PAPER SOURCE SETUP
• PAPER SOURCE SETUP is used to make the various settings for the paper source.
(1)
INCH/METRIC
Purpose
To select the paper size type for each paper
source for automatic paper size detection.
(2)
TRAY1 PAPER
Purpose
To set the type and size of the paper loaded in
Paper Feed Tray/1.
(3)
PAPER TYPE
Purpose
To set the type of paper for the paper source.
✽ appears only when the AD-17 (Di2011 Only) is installed
Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
Setting Details/Precautions
• The default setting is "METRIC."
<Step>
1. Select the tray.
TRAY1 TRAY2
2. Select the appropriate paper size
type.
INCH METRIC
Setting Details/Precautions
• The default setting is "PLAIN" and
"AUTO."
<Step>
1. Select the type of paper.
PLAIN OHP CARD ENVELOP
2. Set the paper size.
AUTO
SIZE INPUT
Setting range: 140 to 432 mm (X)
Setting Details/Precautions
• The default setting is "PLAIN."
<Step>
1. Select the paper source.
TRAY1 TRAY2
BYPASS
2. Select the type of paper.
PLAIN RECYCLE SPECIAL
1-SIDE*
2-9
90 to 297 mm (Y)