Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
(4)
DENSITY (ADF)
Purpose
To set the reading image density level when the
Automatic Document Feeder is used.
NOTE
• The low image density is set as the default
value to prevent a dirty copy from being pro-
duced.
(5)
DENSITY (BOOK)
Purpose
To set the reading image density level when the
Original Glass is used.
(6)
PRINT DENSITY
Purpose
To set the print density.
(7)
LCD CONTRAST
Purpose
To set the brightness of the LCD display.
(8)
LANGUAGE
Purpose
To select the language displayed on the control
panel.
Setting Details/Precautions
• The default setting is "MODE1."
MODE1: To lower the image density to
prevent a dirty copy from
being produced.
MODE2: To produce a copy having an
image density equivalent to
that of the original.
Setting Details/Precautions
• The default setting is "MODE1."
MODE1: To produce a copy having an
image density equivalent to
that of the original.
MODE2: To lower the image density to
prevent a dirty copy from
being produced.
Setting Details/Precautions
• The default setting is "0."
Setting range: -2 (LIGHT) to +2 (DARK)
Setting Details/Precautions
• The default setting is "0."
Setting range: -1 (LIGHT) to +2 (DARK)
Setting Details/Precautions
• Select the desired language and
touch [OK] to set the language.
2-8
ADJUSTING/SETTING