M26/M27, Side Panels Mounted On Right And Left - Siemens SINAMICS S120 Manual

8.47

M26/M27, side panels mounted on right and left

Availability of option
This option is available for the following S120 Cabinet Modules:
● Line Connection Modules
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize Base Cabinets
● Motor Modules in chassis format
● Central Braking Modules
● Auxiliary Power Supply Modules
Description
The side panels (option M26 = side panel mounted on the right; option M27 = side panel
mounted on the left) are fitted at either end of a side-by-side cabinet unit configuration.
With the option M26, the Cabinet Module is fitted with a side panel on the right.
With the option M27, the Cabinet Module is fitted with a side panel on the left.
Installing the side panels
For each cabinet row installed, you must mount one side panel on the right (option M26)
and one on the left (option M27)!
For Cabinet Modules that are delivered with a side panel, the DC connection clamp is
omitted from the side panel. If the installation sequence is modified and the side panel
removed, then a DC connection clamp must be inserted!
Cabinet Modules
Manual, 03/2013, A5E03263538A
DANGER
8.47 M26/M27, side panels mounted on right and left
Options
535