Siemens SINAMICS S120 Manual page 199

Order no.
Rated short-circuit current acc. to IEC
Minimum short-circuit current
- For a parallel connection
The base load current I
1)
300 s.
The power required for the 500/690 V AC auxiliary supply is provided by the supply input voltage.
2)
The specified power loss equals the maximum value at 100 % capacity utilization. The value in normal operation is
3)
lower.
Total sound pressure level of Active Interface Module and Active Line Module.
4)
Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request, see
5)
SINAMICS - Low-Voltage Configuration Manual on the customer DVD supplied with the device.
The cabinet height increases by 250 mm with IP21 degree of protection, and by 400 mm with IP23, IP43 and IP54
6)
degrees of protection.
Current required for reliable tripping of the protective devices.
7)
Cabinet Modules
Manual, 03/2013, A5E03263538A
7)
is based on a duty cycle of 150 % for 60 s or I
H DC
6SL3730- 7TG35-
8BA3
kA 65
A 9000
max DC
5.4 Active Line Modules
7TG37- 7TG41-
4BA3 0BA3
84 100
15000 2500
4000 4000
for 5 s with a duty cycle duration of
Cabinet Modules
7TG41-
3BA3
100
3200
5000
197