4 Installation and Startup
4.2 Startup (JOG from drive side)
Startup (JOG from drive side)
4.2
Table 4-1
Nr.
1. Set drive parameter p29108 to be 1.
2. Switch to JOG menu with drive BOP operation.
3. Press
or
4.3
Startup (PROFINET communication)
Table 4-2
Nr.
1. Set drive parameter p922 to be 1.
2. Make device & network configurations in the
TIA Portal:
Device name
IP address
Telegram
3. Go online to test the PROFINET
communication.
4. Download configurations into controller and
device if the communication works.
Speed control with SINAMICS V90 and S7-300 via Profinet
Entry-ID: 109743898,
V1.0,
Action
button to run the motor.
Action
07/2016
Remarks
JOG function is enabled when p29108=1
Remarks
Select standard telegram 1
As shown in section 3.2.3
16