Siemens SINAMICS S120 Manual page 180

Cabinet Modules
5.3 Smart Line Modules
Order no.
Rated short-circuit current acc. to IEC
Minimum short-circuit current
The base load current I
1)
300 s.
The power required for the 400 V AC auxiliary supply is provided by the line input voltage.
2)
The specified power loss equals the maximum value at 100 % capacity utilization. The value in normal operation is
3)
lower.
Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request, see
4)
SINAMICS - Low-Voltage Configuration Manual on the customer DVD supplied with the device.
The cabinet height increases by 250 mm with IP21 degree of protection, and by 400 mm with IP23, IP43 and IP54
5)
degrees of protection.
Current required for reliable tripping of the protective devices.
6)
178
6SL3730-
kA
A
6)
is based on a duty cycle of 150 % for 60 s or I
H DC
6TE35- 6TE37-
5AA3 3AA3
65 65
6200 9200
for 5 s with a duty cycle duration of
max DC
6TE41- 6TE41-
1AA3 3AA3
84 84
2000 2500
Cabinet Modules
Manual, 03/2013, A5E03263538A
6TE41-
7AA3
100
3200