Siemens SINAMICS S120 Manual page 85

Auxiliary power module
Figure 4-7
At least two terminals are always available to the customer at terminal block -X100 for
tapping the auxiliary voltages.
Table 4- 4 X100, terminal block for tapping the auxiliary voltages
Terminal
1
2
3
4
5
6
The maximum load capability of the auxiliary power supply system is 80 A.
Max. connectable cross-section: 2.5 mm
Max. total current of all tapping terminals available
1)
Cabinet Modules
Manual, 03/2013, A5E03263538A
Auxiliary power module with terminal blocks -X100, -X101 and 24 V DC fuse
Designation Voltage tap
L1 Line voltage (for fan supply via transformer):
L2
380 to 480 V 2 AC or

500 to 690 V 2 AC (max. 759 V AC)

L1 230 V 1 AC (max. 265 V AC)
N
P24 24 V DC for the electronics power supply (max. 30
V DC)
M
2
Electrical installation
4.6 Connections
Rated current
max. 16 A
1)
max. 16 A
1)
max. 10 A
1)
83