X140 Serial Interface (Rs232); X150 P1/P2 Profinet Connection - Siemens SINAMICS S120 Manual

8.22.7

X140 serial interface (RS232)

The AOP30 operator panel for operating/parameterizing the device can be connected via the
serial interface. The interface is located on the underside of the Control Unit.
Table 8- 36 Serial interface (RS232) X140
Pin
2
3
5
Connector type: 9-pin SUB D connector
NOTICE
Connecting cable to the AOP30
The connecting cable to AOP30 may only contain the three contacts which are listed in the
table; a completely assigned cable may not be used.
8.22.8

X150 P1/P2 PROFINET connection

Table 8- 37 X150 P1 and X150 P2 PROFINET
Pin
1
2
3
4
5
6
7
8
Connector type: RJ45 socket
Cable type: PROFINET
Cabinet Modules
Manual, 03/2013, A5E03263538A
Designation
RxD
TxD
Ground
Signal name
RXP
RXN
TXP
Reserved, do not use
Reserved, do not use
TXN
Reserved, do not use
Reserved, do not use
8.22 K95, Control Unit CU320-2 PN
Technical data
Receive data
Transmit data
Ground reference
Receive data +
Receive data -
Transmit data +
Transmit data -
Options
Technical data
455