L00, Use In The First Environment According To En 61800-3, Category C2 (Tn/Tt Systems) - Siemens SINAMICS S120 Manual

8.23 L00, use in the first environment according to EN 61800-3, Category C2 (TN/TT systems)

Note
Only use SIEMENS CompactFlash cards
Please note that only SIEMENS CompactFlash cards can be used to operate the Control
Unit.
8.23 L00, use in the first environment according to EN 61800-3, Category
C2 (TN/TT systems)
Availability of option
This option is available for the following S120 Cabinet Modules:
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
Description
To limit the emitted interference, the drive converters are equipped as standard with a radio
interference suppression filter that conforms to the limits defined in Category C3. By using
the optional line filter (option L00) and additional measures performed in the factory - which
are required in the cabinets - then SINAMICS S120 Cabinet Modules also comply with the
limit values for use in the first environment (category C2) according to EN 61800-3.
The fine filters are suitable for TN or TT systems with grounded neutral point.
Restrictions
Note
Option L00 not available for a parallel connection
Option L00, use in the first environment (category C2) according to EN 61800-3, is not
available for Line Modules in a parallel connection.
Note
Additional information
The measures required on the customer's side, which must be performed to fulfill the limit
values for use in the first environment (category C2) according to EN61800-3, are listed in
the "Configuration Manual SINAMICS Low Voltage" on the customer DVD supplied with the
device.
Cabinet Modules
Manual, 03/2013, A5E03263538A
Options
461