Interface Description; General Information - Siemens SINAMICS S120 Manual

Mounting grid arrangement in the cabinet
The area for connecting the Motor Modules in the cabinet is divided into three grid widths:
● 100 mm
● 200 mm
● 300 mm
The table below shows the grid width assigned to the various Motor Modules.
Table 5- 26
Grid width
100 mm
200 mm
300 mm
Note
Available space in the Booksize base cabinets
The space available for the Motor Modules in the Booksize Base Cabinets is determined by
taking the actual space and subtracting a clearance of 200 mm.
5.5.3

Interface description

5.5.3.1

General information

This chapter describes only those interfaces in the cabinet unit that require additional
connection work by the customer. All other interfaces are pre-wired at the factory and are not
designed for customer connections.
Note
Additional information
All connections to be established on the plant side as well as the interfaces for integration
into the plant control system are described in the circuit diagrams and terminal diagrams on
the customer DVD supplied with the device.
Cabinet Modules
Manual, 03/2013, A5E03263538A
The assignment of the Motor Modules according to grid width
Assignment of Motor Modules (see the section titled "Technical data")
3 to 30 A Single Motor Modules
45 to 85 A Single Motor Modules, 3 to 18 A Double Motor Modules
132 ... 200 A Single Motor Module
Cabinet Modules
5.5 Booksize format Motor Modules
203