Mechanical installation
3.1
Important notes
Transport
Hazards during transport and when replacing components
Please note the following when transporting the cabinet units:
The devices are heavy and are usually top heavy. The center of gravity is marked on the
Ensure that the ground at the installation location is strong enough to bear the weight of
Suitable hoisting gear operated by trained personnel is also required due to the weight
The cabinet units must always be transported in the upright position indicated. The
Transport units comprise several cabinet units. Due to their weight and length, transport
Serious injury or even death and substantial material damage can occur if the cabinet units
are not lifted or transported properly.
Note
Notes on transportation:
The cabinet units are packaged by the manufacturer in accordance with the climatic
The notes on the packaging relating to transportation, storage, and proper handling must
The cabinet units must be carried on a wooden pallet when transported with fork-lift
NOTICE
:
If required, cabinet units can be delivered in transport units. When a crane is used to
Permissible ambient temperatures during transport:
Cabinet Modules
Manual, 03/2013, A5E03263538A
WARNING
devices.
the cabinet units.
of the cabinet units.
cabinet units must not be tipped and transported in a horizontal position.
units must always be transported with the transport rails mounted on top and the
wooden pallet attached.
conditions and stresses encountered during transit and in the recipient country.
be observed.
trucks.
Cabinet units must not be disassembled while still on wooden pallets and awaiting
transport!
move the cabinet units, a crane transport assembly is provided for the transport unit.
– -25 to +70 °C Class 2K3 to EN 60721-3-2
– briefly up to -40 °C for max. 24 hours
3
43