Options
8.4 G33, CBE20 Communication Board
8.4
G33, CBE20 Communication Board
Availability of option
This option is available for the following S120 Cabinet Modules:
● Basic Line Modules
● Smart Line Modules
● Active Line Modules
● Booksize Cabinet Kits
● Motor Modules in chassis format
Description
Figure 8-3
Interface module CBE20 is used for communication via PROFINET.
The module is installed in the factory in the option slot of the CU320-2 Control Unit.
4 Ethernet interfaces are available on the module. Diagnosis of the function mode and
communication are possible via LEDs.
372
CBE20 Ethernet Communication Board
Cabinet Modules
Manual, 03/2013, A5E03263538A