Connection Example - Siemens SINAMICS S120 Manual

Options
8.10 K48, Sensor Module Cabinet-Mounted SMC20
Risk of electric shock!
Only temperature sensors that meet the safety isolation specifications stipulated in
EN 61800-5-1 may be connected to terminals "+Temp" and "-Temp".
Failure to observe these instructions can result in electric shock!
Note
P sense and M sense
The cables for P sense or M sense with P encoder or M encoder must be jumpered at the
encoder end. The supply voltage of the encoder is detected by the SMC20 and automatically
adjusted to 5 V to compensate any power loss.
8.10.4

Connection example

Connection example: Incremental encoder sin/cos 1 Vpp, 2,048
Figure 8-15 K48, connection example: Incremental encoder sin/cos 1 Vpp, 2,048
394
DANGER
Cabinet Modules
Manual, 03/2013, A5E03263538A