Properties Of The Rs232 Interface - Siemens SIMATIC S7-1500 Manual

Cm ptp rs232 ba communication module
Hide thumbs Also See for SIMATIC S7-1500:
Table of Contents

Advertisement

Product overview

2.4 Properties of the RS232 interface

2.4
Properties of the RS232 interface
Definition
The RS232 interface is a voltage interface used for serial data transmission.
Properties
Table 2- 2
Type
Front connector
RS232 signals
Max. data transmission
rate
max. cable length
Standard
RS232 signals
Table 2- 3
The table below shows the meaning of the individual RS232 accompanying signals.
Signal
Designation
TXD
Transmit Data
RXD
Receive Data
RTS
Request To Send
CTS
Clear To Send
DTR
Data Terminal Ready
DSR
Data Set Ready
RI
Ring Indicator
DCD
Data Carrier Detect
14
The RS232 interface has the following properties and meets the following requirements:
Voltage interface
9-pin sub-D male connector with screw lock
TXD, RXD, RTS, CTS, DTR, DSR, RI, DCD, GND; all signals isolated
against the backplane bus and load voltage
19.2 kbps
15 m, cable type LIYCY 9 x 0.14
DIN 66020, DIN 66259, EIA-RS 232C, CCITT V.24/V.28
Meaning
Transmit data; transmit cable logically held to "1" by communication module in idle
state.
Receive data; receive cable logically held to "1" by communication partner in idle state.
Request to send
RTS set to "ON": Communication module ready to send; signals to the communication
partner that there is data ready to send
RTS set to "OFF": Communication module not ready to send
Clear to send
CTS set to "ON": Signals "clear to send" to the communication partner
CTS set to "OFF": Signals "Not clear to send" to the communication partner
DTR set to "ON": Communications module switched on, ready for operation
DTR set to "OFF": Communications module not switched on, not ready for operation
DSR set to "ON": Communication partner signals "ready for operation"
DSR set to "OFF": Communication partner not switched on, not ready for operation
Incoming call when connecting a modem
Carrier signal when connecting a modem. The communication partner signals with a
high level that it detects incoming data on the cable.
CM PtP RS232 BA communication module (6ES7540-1AD00-0AA0)
Manual, 01/2013, A5E03777472-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic et 200mp6es7540-1ad00-0aa0

Table of Contents