Table 6- 2
Interface
Digital inputs
Digital outputs
Analog inputs
Analog outputs
The Terminal Board may only be inserted and removed when the D4x5 Control Unit and
the TB30 Terminal Board are de-energized.
Additional references
You will find detailed information about the TB30 Terminal Board in the
●
●
6.4
CBE30 communication board
Features of the CBE30
The Ethernet communication board (CBE30) for SIMOTION D4x5 enables connection to a
PROFINET IO network. The SIMOTION D4x5 then assumes the role of a PROFINET IO
Controller and can offer the following functions:
● PROFINET IO Controller, I-Device (also controller and device simultaneously)
● 100 Mbit/s full duplex/autocrossing
● Supports real-time classes of PROFINET IO:
The CBE30 has a X1400 interface with an integral 4-port switch based on PROFINET ASICs
ERTEC400.
The CBE30 may only be inserted and removed when the D4x5 Control Unit and CBE30 are
in a de-energized state.
D4x5
Manual, 05/2009
Overview of TB30 interface
CAUTION
Supplementary SINAMICS System Components for SIMOTION
SIMOTION D4x5
Commissioning and Hardware Installation Manual
– RT (Real Time)
– IRT (Isochronous Real Time)
CAUTION
Spare parts/accessories
6.4 CBE30 communication board
Quantity
4
4
2
2
Manual
73