Quilting frame assembly
> Tighten the pre-fitted grub screws so that the rail and ratchet wheel are securely connected to one
Attaching the handwheel to the take-up rail
Required parts and tools:
• Handwheel (M3)
• Locking piece (M4)
• Winder bolt (M5)
• Countersunk screw M5x10 (S3)
• Countersunk washer D25 (W4)
• Sticker, round (included with the M3 handwheel)
• Allen keys no. 3 and no. 4 (T1)
> Remove and dispose of the yellow plastic cap from the right-hand end of the take-up rail.
> Insert the locking piece (M4) into the recess on the end of the take-up rail.
> Attach the handwheel (M3) precisely to the protruding end.
52
another.