> To ensure that the carriage later rests optimally on the tracks, pull the track outwards and then tighten all
head cap screws (S6).
Attaching the front track
Required parts and tools:
• 8× head cap screws M4×16 (S6)
• 2× button head self-tapping screws 6.3×22 (S12)
• 1× track
• 2× black plastic inserts
• Allen key no. 3 (T1)
• Torx screwdriver no. T30 (included in the box with the machine)
> Pull the two black plastic inserts out of the tracks.
> Insert the head cap screws (S6) into the holes on the track one after the other.
Quilting frame assembly
29